低压配电装置及低压电器运行规程(国外英文资料).docVIP

低压配电装置及低压电器运行规程(国外英文资料) Low voltage distribution device and low voltage electrical operation procedure directory One, general requirement 2 2, low voltage distribution unit inspection and maintenance 3 Third, low voltage distribution devices precautionary test 5 4, low voltage distribution device abnormal operation and failure processing 5 Low voltage distribution device and low voltage electrical operation procedure One, general requirement 1.1 low voltage power distribution equipment and low voltage electrical appliances should be chosen by the relevant state departments of styling products (except with special needs non-standard products), stated in the phase-out products is strictly prohibited. The technical parameters of the low voltage distribution device must meet the operating requirements. The load that the low-voltage distribution unit controls must be divided, and the multi-load sharing of one switch control is avoided. The supply circuit of the low voltage distribution device shall be controlled separately according to the load property. The voltage distribution device should be numbered, and the main control device shall be the unified operation number. The feeder shall specify the load name and shall be labeled on the low voltage system simulator. The selection and setting of electrical protection elements at all levels of low voltage power distribution devices shall be in accordance with the requirements of action selectivity. The instrument and stoplight on the 1.6 low voltage distribution device should be fully in good condition, the meter range and the size and capacity of the transformer should be matched. 1.7 all equipped with low voltage distribution equipment of electrical source system, transmission experiment was carried out on a regular basis, check on the reliability of its action in the liaison office of the two power supply, should be clearly labeled. 1.8 low voltage power distribution equipment and spontaneous contact device of electric