全线涵洞施工要求(国外英文资料).docVIP

全线涵洞施工要求(国外英文资料) Technical record form No. : Name of the entity The culvert technology is at the bottom of the line Disclosure of Review one Date of disclosure Bottom department and personnel: The details of the bottom line: The specific contents of the annex 1 and the full line culvert construction requirements Annex ii, culvert technology is in the background Information on the bottom of the line (whether there is any problem) : Accessories: full line culvert construction requirements The culvert technology is at the bottom of the line All of the construction requirements for the culvert A, templates, 1, the cover plate cast-in-situ slab culvert, its foundation, wall body (including import and export side wing wall) and flat bottom die using large steel template, single block template area of not less than 1 ㎡. 2, all adopt large steel formwork frame culvert, single block template area of not less than 1 ㎡. 3, round GuanHanHan finalize the design template is the site prefabrication, import and export side wing wall using large steel template, the single block template area of not less than 1 ㎡. Second, the time limit for a project All the construction period must be completed by the end of July. The culvert technology is at the bottom of the line A basis, Construction preparation Before foundation excavation, temporary facilities, power, lighting, security facilities, construction equipment must enter the scene, and clear the surface tillage planting soil, flat area, remove obstacles, label processing range. After the preparation work, the field technician will inform the project department to set the sample. Out after the completion of the project department metering, construction group, according to metering lofting culvert axis and the direction of the pile, combining with the culvert drawings and consider put slope, with marked with white excavation contour line. The excavation of the excavation is calculated. The culvert pit excavation (1) drainage of the su