康佳“K”系列彩电工厂菜单调试(国外英文资料).docVIP

康佳“K”系列彩电工厂菜单调试(国外英文资料) 1) prepare a debug remote control, and the K/N series of factory debugging remote controls is the same as the users remote control. 2) the instruments required for preparation; Including oscillograph, multimeter (internal resistance: 20 kr/V DC acuity, AC 5 kr/V or higher) and high pressure table (35 kv), current meter (0.5 magnitude DC 3 ma), eraser, philips image signal generator (PH5820 or same type). The machine should be preheated for more than 30 minutes before commissioning, and the whole machine should be degaussing. 4) check the ac voltage for 220V and 50Hz. Check + B voltage within the specified range (+ B voltage is set according to the specification and type of the tube). 5) if you replace the memory N601 (PCF8598) and the main chip N101 (TDA9383 or TDA9380), confirm the application of the same machine data. Prepare before debugging Use the remote control to access the factory menu Remote control shape and keys function as shown in figure 1, press the MENU (MENU) button to display the MENU (MENU display to keep time for 10 seconds), the MENU is not disappear, press back to see five times in a row before enter the factory debugging MENU. After entering the factorys debug MENU, press the MENU button to select the debug MENU 1 to the debug MENU 6, which is the FACTORYl ~ FACTORY6. When display the debug menu, available show Sunday afternoon ∨ key select debug program, select debug program after a red (selected) can use the volume control key VOL +, VOL - to adjust the parameter values of this project, until reaches meets the requirements. When all debugging projects are completed, once again, the key will be returned to the factory, and the normal viewing of color TV will be restored The K/N machine factory of kangjia super chip K/N Kangjia super chip K/N machine Factory debug menu 1 (FACTORYl) content description Screen display content The screen shows the content The factory reference The adjustable range note The CHANNEL Channel