建筑给排水设计体会(国外英文资料).docVIP

建筑给排水设计体会(国外英文资料) The design of water supply and drainage is experienced Abstract: the author used the local rain waste confluence system, but in recent years, with the development of economy, peoples living standards improve, housing area increased, layer on the rise, often appear lower household drain gas and water, especially in the case of a drain plug or half blocked, water golden hill, make the room luxury decoration and storage items of flooding, caused economic losses, many disputes occur, serious consequences. Key words: building water drainage design experience A design specification problem 1, water supply calculation problem Article 2.6.4 in the design of water and drainage design of the building, the formula for water design flow in residential and other construction: A + KNg qg = 0.2 Type a and K are calculated according to the use of buildings, and Ng is the total amount of water equivalent of the water supply for the calculation of pipe segment. One set of 100m2 single-family home: kitchen bibcock equivalent 1.0, washing machine bibcock equivalent 1.2, washbasin equivalent 1.0, large toilet equivalent 0.5, tub equivalent 1.5. A total of 5.2 equivalent. Design flow for water supply in two types of housing: qg = 0.2 * 1.02 + 0.0045 * 5.2 = 0.49 l/s. The same set of 1, 100m2 double home, the equivalent total of 8.2, and the water design second is 0.61 l/s. Both related to 24.4%, the former use 3/4 feed line (V = 1.5 m/s), which selects the DN25 inlet pipe (V = 1.15 m/s), using the same number, same area 2 sample results. This is expected to be considered when the specification is modified. The building water supply and drainage design code provisions that have a self-closing flush valve article 2.6.4 life water supply design second flow calculation formula of the four, these four in the specification are not reflect in the article text 2.6.4 formula and annotation, easy calculation caused by negligence, affect the calculated result. Specification for d