外墙平涂施工方案(国外英文资料).docVIP

外墙平涂施工方案(国外英文资料) Exterior wall latex paint flat, elastic flat coating construction plan A, the construction process The basic processing of the basic processing, the putty (fine) powder, the polishing, the exterior wall paint, the construction exterior wall paint B, construction technology Section 1, engineering categories Old wall, old ceramic tile, Mosaic surface exterior wall latex paint, elastic flat painting construction procedure: Remove the impurities of the original surface and the old tiles and mosaics that have loose hidden dangers. Rinse with high pressure water when necessary. Batch embed putty: Renovation putty: (1) A two-component toughness interface composed of powder and curing agent A: B = confidence, will need electric mixer of powder proportion, curing agent, water mixture, stir to mix together after the wet material should be finished in three hours. Batch the original porcelain with water wet and wet before using water to wet the original porcelain to be able to apply the putty after the incomplete water. Usually takes 2 to 3 times, the dosage is about 2.5-4 kg (powder/m2), the be bored with child after completing its surface dry embedded are to be sprinkler (2 to 3 times a day) maintain 3 to 4 days, then dry 3-4 Arabian can into the next process. Dust the dust. Quality requirements: There is no scratch mark. The surface is smooth and solid. The degree of flatness 2mm. The exterior wall coat. Exterior wall paint, exterior wall elastic surface paint. Two, the concrete wall exterior wall emulsioni paint, the elastic surface paint construction flow: The base material processing, the leveling of the putty, the determination of the seam, exterior wall paint, exterior wall paint. The whole project is strictly in accordance with the process construction. Section 2, pre-construction organization To understand the progress of the whole project and adjust the plan of our construction organization. 2, construction personnel arrangement: Construction and