最终程序(国外英文资料).docVIP

最终程序(国外英文资料) Z8279 is 8001H; Status/command address of 8279 D8279. 8279 data address LEDMOD 000000h; The left input eight character display; External decoding key scan mode, double key interlock LEDFEQ Scan rate LEDCLS. Clear display RAM LEDWR0 and 80H; Set the display RAM address to be written ORG 0000 h AJMP MAIN ORG 000 bh AJMP IT0P ORG 0100 h MAIN: ACALL INIT8279 MOV TMOD, # 01 h MOV 20 h, # 14 h MOV R1, # 00H; The alarm starts at 15:00 MOV R2, # 00H; The low, high, low, high, low, high, high, low, high, low, high, low, high, MOV R3, # 15 h. MOV 42H, # 50H; Set the initial value of 14:59:00 MOV 41H. Low, high, low, high, low, high, low, high, high, low, high, low, high, low, high, low, high, low, high MOV 40 h, # 14 h SETB ET0 SETB EA MOV TH0, # 4 ch MOV TL0, # 00 h SETB TR0 HERE: SJMP HERE IT0P: SETB P1.0 LCALL ALARM; Judge whether the bell is ringing ACALL DISPLAY; According to PUSH PSW PUSH the Acc MOV TH0, # 4 ch MOV TL0, # 00 h DJNZ 20 h, RETURN MOV 20 h, # 14 h MOV. A, # 01 h ADD A, 42 h MOV 42 h, A CJNE A, # 5 ah, RETURN MOV 42 h, # 00 h ; MOV 42 h, A; MOV 42 h, A MOV. A, # 01 h ADD A, 41 h MOV 41 h, A CJNE A, # 5 ah, RETURN MOV h, 41 # 00 h MOV. A, # 01 h ADD A, 40 h MOV 40 h, A CJNE A, # 24 h, the RETURN MOV 40 h # 00 h RETURN: POP Acc POP PSW RETI INIT8279: 8279 initializerPUSH DPH; Save the scene PUSH DPL PUSH the ACC LCALL DELAY; Time delay MOV, DPTR, # Z8279 MOV A, # LEDMOD; 8279 works MOVX @ DPTR, a. MOV A. Keyboard scanning rate MOVX @ DPTR, a. MOV A, # LEDCLS; Clear LED display MOVX @ DPTR, a. LCALL DELAY; Time delay POP ACC; Restore the scene POP DPL POP DPH RET DISLED: PUSH DPH; Save the scene PUSH DPL PUSH the ACC MOV A, # LEDWR0; Displays the starting address ADD A, R4; Add position offset MOV DPTR, # Z8279 MOVX @ DPTR, A; Set display location MOV. Display the starting position of the table of constants MOV A, R5 MOVC A. Look-up table MOV DPTR, # D8279 MOVX @ DPTR, A; Display the data POP ACC; Restore the scene POP DPL POP DPH RET DISPLAY: M