球形刀三坐标曲面加工刀位计算方法(国外英文资料).docVIP

球形刀三坐标曲面加工刀位计算方法(国外英文资料) The method of calculating the position of a spherical tool with three coordinate surfaces Launch time: 2010-8-617:09:56 source: Ball end milling knife three coordinates numerical control processing, which requires the knife axis always remains the same, and the same as that of machine tool spindle, which requires the processing surface on the knife axis is monotonous. Since the axis of the three-coordinate processing knife cannot be changed, the cutting point on the edge of the blade varies according to the slope of the processing surface in the Z direction. Generally speaking, the Angle of the machining surface and Z axis varies according to the processing position on the surface, which can improve the life of the spherical knife. Three coordinates processing disadvantage is that the spherical cutter location of cutting speed with the cutting blade, spherical cutter endpoint and machining surface contact when cutting speed is zero, poor cutting performance. Therefore, the use of spherical cutter machining is smooth surface, the processing of surface flat direction and plane XOY tilted a certain Angle can be beneficial to the machining speed and machining surface quality, of course should guarantee the machining surface on the Z coordinate direction is monotonous. The method of calculating the position of the knife The knife position of the three-coordinate system of a spherical knife is the center of the knife, which is fixed in the position of the spindle vector (0, 0, 1). The formula for calculating the knife of a ball tool is: In the form of components: 1.2, machining error analysis and compensation method Nc machining, the machining error caused by factors in the movement precision of machine tool error, size error of cutting tool, machine tool, cutting tool and the thermal deformation and elastic deformation error of the parts, and programming the calculation error and the error due to machining method, etc., here only discuss the er