marvell 88w8686 固件下载程序说明.docVIP

Marvell 88w8686 Firmware Download Procedure By WiFiMod: Archive for the ‘Marvell WiFi Development’ Category Marvell 88w8686 Firmware Download Procedure—–SPI Interface Helper download / Single Stage firmware: 1. Device (boot code) writes to Command Write Base Address Register to set the location for Firmware download.2. Device (boot code) writes ‘1’ to CmdDnLdRdy (bit 2, Host Interrupt Cause Register) to indicate that the device is ready for firmware download.3. Scratch pad 1 (0×0028) should contain the number of bytes downloaded to the firmware in the current iteration.4. Wait for CmdDnLdRd