铝箔防盗盖理盖器的创新设计.pdfVIP

包装与食品机械2016第 34卷第4 期 铝箔防盗盖理盖器的创新设计 张有良1，孙建华2，戴明利3，苟向民1，王剑峰1，陈 毅 1 ( 1 轻工业西安机械设计研究院，西安710086;2 轻工业钟表研究所，西安710061; 3• 北京工商大学计算机与信息工程学院，北京 100048) 摘要：铝箔防盗盖新型理盖器设计目的是为了缩短瓶盖在理盖器中运动时间。设计中采用两项主要 技术，一方面，新型理盖器采用真空吸附与多处压缩空气吹盖新技术，真空吸附使瓶盖快速朝同向排列，多 处压缩空气吹盖，吹去浮盖、反盖，减少瓶盖的无效堆积，加快瓶盖理顺。另一方面，对于瓶盖输出轨道上 瓶盖状态进行检测，有效控制理盖器转动。达到了瓶盖在理盖器中运动时间短的目的，提高理盖效率。 关键词：铝箔防盗盖；理盖器；旋盖机;真空吸附 中图分类号:T S 2 0 6 .5 文献标志码:A 文章编号=1005 -1295(2016)04 -0040 -03 doi 10. 3969/j. i： n. 1005 -1295.2016. 04.009 Innovative Design of Tidying Lid Machine about Antitheft Aluminum Foil Lid ZHANG You-liang1 ,SUN Jian-hua2 , DAI Ming-li3 ,G0U Xiang-min1, WANG Jian-feng1, CHEN Yi1 (1. Light Industry Xi ^ an Mechanical Research Institute, Xi ^ an 710086, China ;2. Horological Research Institute of Light Industry Xi, an 710061 ,China;3. School of Computer and Information Engineering, Beijing Technology and Busine Universty,Beijing 100048,China) Abstract In ：order to shorten the running time of the covers in the tidying machine, there were two new technologies in design. For one thing, it was used the vac-sorb and the new technology of the blowing lid by compre ed air, the lids were arrayed quickly by the vac-sorb , using the blowing lids technology in order to blow the lapped and reverse lids,reduce the usele accumulation of lids and expedite the tidied speed. For an­ other thing, it was controlled the tidying machine twirl effectively, and shorten the running time, and improved the efficiency of tidying lids by detecting the state of the lids which were on the track. Key words antitheft ： aluminum foil lid; tidy lid machine ; screw lid machine; vac-sorb 〇 引言