DS2786BG+;DS2786BG+TR;中文规格书,Datasheet资料.pdf

19-5223; Rev 1; 4/10 Stand-Alone OCV-Based Fuel Gauge General Description Features D The DS2786B estimates available capacity for recharge- ♦ Relative Capacity Calculated from Combination S able Li-ion (Li+) and Li+ polymer batteries based on the Coulomb Counter and Open-Circuit Cell Voltage 2 (OCV) Battery Model 7 cell voltage in the open-circuit state following a relax- 8 ation period. The open-circuit voltage (OCV) is used to ♦ Accurate Warning of Low-Battery Conditions determine relative cell capacity based on a lookup table Even on First Cycle (No Learn Cycle Needed) stored in the IC. This capability makes accurate capacity ♦ 12-Bit Battery Voltage Measurement 6 information available immediately after a battery pack is ±10mV Accuracy B inserted. During periods of moderate to high rate dis- 1.22mV LSB, 0V to 4.5V Input Range charging, which preclude OCV measurements, the ♦ 11-Bit Bidirectional Current Measurement DS2786B uses coulomb counting as a secondary 25µV LSB, ±51.2mV Dynamic Range means of estimating relative capacity. 1.67mA LSB, ±3.4A (RSNS = 15mΩ) Remaining capacity is