冷轧预变形对2519A铝合金时效析出的影响-中南大学学报.PDF

42 1 () Vol.42 No.1 2011 1 Journal of Central South University (Science and Technology) Jan. 2011 2519A ( 410083) 2519A 7%40% 15%~30% θ′ 2519A TG166.3 A 1672−7207(2011)01−0046−05 Effects of cold-pre-rolling reduction on precipitation of 2519A aluminum alloy plate ZHANG Xin-ming, JIA Yu-zhen, LIU Ling, YE Ling-ying, CHEN Ming-an, GAO Zhi-guo, WANG Wen-tao, KUANG Xiao-yue (School of Materials Science and Engineering, Central South University, Changsha 410083, China) Abstract: The effects of cold-pre-rolling reduction on precipitation and mechanical properties of 2519A aluminum alloy plate were investigated by tensile test, differential scanning calorimetry (DSC) and transmission electron microscopy (TEM). The results show that cold-pre-rolling after quenching promotes the formation of semi-coherent phase θ′, but suppresses that of coherent phase θ″ and GP zone. Reduction increasing from 7% to 40% results in peak-age strength decreasing at first, then increasing, and so does elongation. When the reduction is from 15% to 30%, the lost strength can be attributed to the inhomogeneous distribution of θ′ phase. Key words: 2519A aluminum alloy plate; cold rolling; pre-deformation; precipitation; mechanical properties 2519 20 80 3 [1] Al-Cu-Mg-Ag Ω [2−3] (AAAV [8] Al-Cu-Li T1 Advanced amphibious assault vehicle)[4]2519A 2519 [9] [5−6] Al-Cu