如何把从ds1302中读出地数据用51单片机用动态扫描方式显示在数码管.docVIP

#includereg52.h sbit clock_clk=P2^7; sbit clock_dat=P2^6; sbit clock_rst=P2^5; sbit wei1=P2^0; sbit wei2=P2^1; sbit wei3=P2^2; sbit wei4=P2^3; sbit wei5=P2^4; sbit wei6=P3^3; sbit a0 = ACC ^ 0;//为了编程方便定义的位变量 sbit a1 = ACC ^ 1; sbit a2 = ACC ^ 2; sbit a3 = ACC ^ 3; sbit a4 = ACC ^ 4; sbit a5 = ACC ^ 5; sbit a6 = ACC ^ 6; sbit a7 = ACC ^ 7; unsigned char Tab_Num[] = {0xc0, 0xf9, 0xa4, 0xb0, 0x99, 0x92, 0x82, 0xf8, 0x80, 0x90};//0-9数字 void delay(int num)//延时函数 { while(num--) ; } void clock_write(unsigned char dd) //写入一个字节，DS1302时序 { ACC=dd; clock_clk=0;clock_dat=a0; clock_clk=1; clock_clk=0;clock_dat=a1; clock_clk=1; clock_clk=0;clock_dat=a2; clock_clk=1; clock_clk=0;clock_dat=a3; clock_clk=1; clock_clk=0;clock_dat=a4; clock_clk=1; clock_clk=0;clock_dat=a5; clock_clk=1; clock_clk=0;clock_dat=a6; clock_clk=1; clock_clk=0;clock_dat=a7; clock_clk=1; } unsigned char clock_read(void) //读出一个字节，时序 { clock_clk=1; clock_clk=0; a0=clock_dat; clock_clk=1; clock_clk=0; a1=clock_dat; clock_clk=1; clock_clk=0; a2=clock_dat; clock_clk=1; clock_clk=0; a3=clock_dat; clock_clk=1; clock_clk=0; a4=clock_dat; clock_clk=1; clock_clk=0; a5=clock_dat; clock_clk=1; clock_clk=0; a6=clock_dat; clock_clk=1; clock_clk=0; a7=clock_dat; return(ACC); } unsigned char read_clock(unsigned char reg1)//从reg1寄存器读数据 { unsigned char dd=0; clock_clk=0; clock_rst=0; clock_rst=1; clock_write(reg1); dd=clock_read(); clock_rst=0; return(dd); } void write_clock(unsigned char reg2, unsigned char date)//向reg2写入date数据 { clock_clk=0; clock_rst=0; clock_rst=1; clock_write(reg2); clock_write(date); clock_rst=0; } void show(void)//显示和闪烁函数 { unsigned char d, e; unsigned int i; for(i=0;i1000;i++) { d=read_clock(0x81);//读秒 e=d; d=d4; e=e0x0f; P0 = Tab_Num[ d ];//秒十位 wei2=1; delay(250); wei2=0; P0 = Tab_Num[ e ];//秒各位 wei1=1; delay(250); wei1=0; d=read_clock(0x83);//读分钟 e=d; d=d4; e=e0x0f; P0 = Tab_Num[ d ];//分十位 wei4=1; delay(250); wei4=0;