拉深筋结构参数对变形及阻力的影响.pdfVIP

Vol.15 No.2 第 15 卷第2 期 组性J民枝，警报 2008 年 4 月 JOURNAL Q:F J?LAs丁ICITY ENGINEERING Apr. 2008 拉深筋结构参数对变形及阻力的影晌铃 (燕山大学机械学院，秦泉岛 066004) 金蒜郭宝峰李群 摘 要:文章通过数值模拟与实验相结合的方法，以 A5757 铝合金板材为对象，系锐地研究了拉裸筋的主要结构 参数对拉探筋阻力及通过1ft探筋后板厚减薄量的影响，从力能特性及变形两个方丽对拉探筋进行了对比分析。研 究结果表明，拉部筋结构参数对拉裸筋阻力及板厚减薄蟹的影响趋势相间，而拉探筋阔角半径对板摩减薄攘的影 响远大于对拉探筋阻力的影响。并以此为基础，对拉探筋的设计调整策略进行了讨论，为投探筋的设计调整提供了 理论依据和实验数据。 关键词:拉部筋z 变形;阻力;板料成形 中团分费号: TG386.3 文献标识码:A 文章编号: 1007-2012 (2008) 02-0105-04 The effect of drawbead dimension parameters on the reduction in thickness and DBRF JIN Miao GUO Bao-feng LI Qun (Coll咽e of Mechanical Engineering. Yanshan Uníversity , Qinhuangdao 066004 China) Abstract: The drawbead restricting force (DBRF) and the reduction of thickness of sheet through drawbead aHected by main di即 menslon parar时ters of drawbead is studied by FEM simulations and experiments with A5757 A-a1Joy sheet. And drawbead is dis- cussed in terms of DBRF characters and deform.ing. The results show that the influence tendency of DBRF and the reduction of thíckness wíth drawbead dimension parameters are consistent However. the effect of changing comer radius of the drawbead on the reduction in thickness ís much larger than that on DBRF. Then the adjusting strategies of drawbead dimension parameters are discussed that províde the theoretic analysís and experiment data for drawbead design and adjustment. Keyw，创曲: drawbead; deforming; DBRF; sh创t forming 的研究工作也主要集中在这一方酣[叫。目前对拉深 筋阻力、夹持力等关键力能参数的形成机理、构成 引 及影响因素等方面的研究工作巳较为系统，并开始 对拉探筋的现代设计方法进行探讨[叫。 拉深筋是拉深模具的重要组成部分，是复杂及 难成形