给水排水毕业设计摘要.docVIP

摘 要 随着工业和城市建设的迅速发展，无锡市的现有供水设施已不能满足用水需要，并且水厂处理设备普遍处于超负荷运行。为了确保该市2016年城市总体规划的实现，必须扩大现有城市供水设施。因此省计经委上级同意建设无锡市给水工程。 无锡市中桥水厂给水工程设计包括了全套新的输配水管网设计，以及配套的取水构筑物，二泵站，以及水厂净化处理构筑物的设计。 无锡市地处太湖水网地区，水资源丰富水量充沛。无锡市已在锡北运河，五里湖，外太湖上建造了取水构筑物,为满足日益增长的供水需求，在外太湖沿岸新建中桥水厂。太湖为我国五大淡水湖之一，系地表水源。综合分析太湖沿岸水文地质情况采用岸边合建式取水构筑物。 根据水源能力，中桥水厂设计规模定为30万m3/d。选择的原则是根据原水水质、水量及当地气候特点，采用技术先进，运转安全可靠，操作管理方便，经济合理的运转工艺，以确保出水水质。 鉴于水库水源水质的不断恶化，饮用水水质标准的不断提高，人们对水质的要求也逐年增强，显然，一般常规处理工艺局限性所带来的影响，迫使人们不得不寻求如何提高或改善或强化常规处理工艺，以适应人们日益提高对供水水质的要求。处理’=300000m3/d，水厂自用水量按8%计算，计算水量Q=324000 折板反应池分为三组，每组设计水量为Q = 10万m3/d，一组由两个絮凝池组成则单池设计流量为q=0.625m3/s。絮凝时间T = 13min，絮凝池采用多通道折板絮凝池，里面安装折板箱，采用平行折板,分四档，每档流速分别为V1=0.3m/s，V2=0.25m/s，V3=0.20m/s ，V4=0.15m/s 折板反应池为六个，则相应建六个斜管沉淀池。单个沉淀池设计流量:q=0.625 m3/s。清水区上升流速:2.8mm/s,沉淀池尺寸为。为保证进水均匀，进水区沿一侧。池子总高4.87m,沉淀时间4.8min. 采用平流式气浮池，分三个系列，每个系列分8格，共24格 气浮区载气浮升分离速度：,气浮池接触室上升流速：,. 单格气浮池接触室面积9.45m2，气浮分离室平面面积为69.30分离室长度11m 设计滤速 V=10m/h,强制滤速V=12m/h,过滤周期T=48h,为节省占地,选双格V 型滤池,单格宽B =4m,长L =15.14m,单格面积60.50,共分2 座,左右对称布置,每座面积f=121,总面积1452。滤池总高度4m 拟建两个清水池，池子有效水深取 hu = 4.5 m，单池面积则为5000m2，采用正方形清水池，清水池的边长为71m。 ABSTRACT Along with the quick development of the industry and the city construction, the existing water supply facilities t in Wuxi City has already cant satisfy to use the water demand, and the water factory processing equipments is widespread to be placed in the super burden movement. For insuring the realization of the total programming in 2016, we must extend the existing city water supply facilities. So the province according to the reply constructed by upper grade Province agree to the water supply engineering in Wu xi City. The water supply engineering designs of Zhongqiao water factory in Wuxi City include the integrity pipe line net design, the facilities for taking and sending the water, and the facilities for water processing . The Wuxi City is in the water net region of the Tai lake, and the amount of water is abundant. There have been the north canal water factory, wuli lake water factory, and Zhongqiao wa