高气压高能放电小型低速风洞的研制.pdfVIP

第33 卷第2 期 重 庆 大学 学 报 Vol.33 No.2 2010 年2 月 Journal of Chongqing University Feb. 2010 : 1000582 (2010) 1 2 2 2 陈 平 , 张 钧 ,何仕健 , 朱本华 ( 1. 重庆大学 机械传动国家重点实验室,重庆 400044; 2. 中国 气动力研究与发展中心, 四川绵阳622662) :根据高能放电腔的特点以及放电对气体流量流速和流场的要求, 提出了应用于高气 压强电离放电的小型低速风洞技术方案该技术方案在满足流场流速要求的前提下开展气动设 计和结构设计, 重点研究了总体结构气流喷口和收集口的气动与结构设计动力段气动与结构设 计流速调节控制电机散热等关键技术简要介绍了为某单位研制的应用于高能放电的小型风 洞现场应用表明, 该小型风洞稳定可靠, 是一种实用有效的高气压高能放电气流循环装置 : 高气压高能放电; 喷气装置;风洞; 流场 :T H122 :A Smallscale wind tunnel for high pressure and high energy discharge 1 2 2 2 CHEN Ping , ZHANG Jun , HE Shijian , ZHU Benhua ( 1. State Key Laboratory of Mechanical Transmission, Chongqing University, Chongqing 400044, P. R. China; 2. China Aerodynamics Research Development Center, Mianyang 622662, Sichuan, P.R. China) Abstract: A kind of smallscale wind tunnel with lowvelocity is proposed according to the characteristics of strong ionization discharge chamber and the demands of dischargefor flux, velocity and flow fields. On the precondition that the airflow field and velocity is satisfied, aerodynamic design and structural design are carried out. Key techniques are studied including overall structure, aerodynamic and structural design of airflow vent and collection vent, aerodynamic and structural design of power section, flow rate adjustment and control, and cooling system of motor. Based on the design scheme, a smallscale wind tunnel with strong ionization discharge for an enterprise is developed. Application indicates that the smallscale wind tunnel is a practical and effective airflow loop device for high pressure and strong ionization discharge with the features of stabili