循环流化床一体化污泥干化焚烧工艺的冷态实验研究-中国电机工程学报.PDF

第30 卷 第35 期 中 国 电 机 工 程 学 报 Vol.30 No.35 Dec.15, 2010 2010 年12 月15 日 Proceedings of the CSEE ©2010 Chin.Soc.for Elec.Eng. 1 文章编号：0258-8013 (2010) 35-0001-06 中图分类号：TK 223 文献标志码：A 学科分类号：470·20 循环流化床一体化污泥干化焚烧工艺的 冷态实验研究 1 2 2 2 李云玉 ，吕清刚 ，朱建国 ，朱治平 (1．中国科学院研究生院，北京市 海淀区 100190 ； 2．中国科学院工程热物理研究所，北京市 海淀区 100190) Cold Tests on Drying and Incineration Integration Technology of Sewage Sludge in a Circulating Fluidized Bed 1 2 2 2 LI Yunyu , LÜ Qinggang , ZHU Jianguo , ZHU Zhiping (1. Graduate University of Chinese Academy of Sciences, Haidian District, Beijing 100190, China; 2. Institute of Engineering Thermophysics, Chinese Academy of Sciences, Haidian District, Beijing 100190, China) ABSTRACT: A new technique integrating drying and 果表明：系统中直接返回主床和通过干化器返回主床两个循 incineration of sewage sludge in a circulating fluidized bed 环回路之间的压力耦合关系是系统稳定运行的关键；主床流 (CFB) was applied, and cold experiments were conducted. The 化速度的变化对系统循环流率及气动控制阀两侧返料流率 diameter of main bed which coupled with the fluidized bed 的影响趋势一致，但干化器侧与主床侧的循环流率的变化速 dryer was 150 mm, and the height was 3 500 mm; the 率不同；气动控制阀两侧返料管所连压力平衡管对循环流化 pneumatic control valve used in the tests was asymmetric. The 床一体化污泥焚烧系统稳定运行非常重要。 results show that the key factor which influences the system’s