计算说明说书.docVIP

毕业设计说明书 学 生： 杨士龚 指导老师：张振华 三峡大学土木与建筑学院 摘要：本设计是山东潍坊至莱阳高速公路工程施工图设计(段)，该路段位于平原区。通路本公路工程设计可以更好的沟通山东潍坊和莱阳，使得两个城市间的交通更加便利，造福两座城市的人民；同时本公路的设计施工使得我国的公路网更加完善，能进一步加速我国国民经济发展。此次设计主要内容平面设计纵断面设计横断面设计路基路面设计支护和防护设计以及排水的设计。本平面设计中设计时速为120公里每小时，拟定两方案进行比选。方案设计里程为5m，路线平面设置个交点，纵断面设置3个变坡点。路基宽度为28米，横向超高值按绕中央分隔带边缘旋转计算路面设计进行了两个方案的比较，最终路面采用沥青混凝土路面。设置了边沟、排水沟、截水沟设施。 The design is Weifang to Laiyang Expressway construction drawing design (C section), the sections located in the plains and hills. This highway engineering design of the pathway can better communicate Weifang, Shandong Laiyang, making the traffic between the two cities more convenient for the benefit of two people of the city; the design and construction of the road makes our countrys road network is more complete, we can further accelerate our national economic development. The main design includes graphic design, design of longitudinal cross-sectional design, subgrade and pavement design, slope support and protection design, bridge and culvert channel design and drainage design. The graphic design of this design, the design speed of 120 km / h, and prepared two options for comparison and selection. The selected design mileage for the 5208m, set up two routes plane intersection, longitudinal set up a three point of gradient change. The road subgrade width of 28 m, the calculation of rotation of the horizontal ultra-high value around the edge of the central median. Pavement Design cement concrete pavement program and asphalt concrete program of both programs were compared, the final road surface with asphalt concrete pavement. Set up the ditches, drains, drainage ditches, and other ancillary facilities. Through this design, we have completed the requirements of the construction drawings and design expertise has been the understanding of the system. 关键词 高速公路 公路等级 线形 路基 桥梁 路面 设计 Keywords: expressway road grad linear roadbed bridge pavement design 目录 前言 5 1 绪论 8 1.1选题意义 8 1.2本文研究主要内容 8 2 总体设计 9 2.1概述 9