基于物理回路建模的智能标签的优化研究.pdf

基于物理回路建模的智能标签的优化研究 田 源 1 张志朋 2 张 畅 2 李 展 2 张国辉 3 1. 国网宁夏电力公司建设部，银川 750001 ；2. 国网天津滨海供电公司，天津 300450 ； 3. 南京五采智电电力科技有限公司，南京 211106 摘要 当前智能变电站中智能标签技术采用私有数据库结构方式，该技术不规范、不统一、 不利于项目的普及与推广。文中对基于物理回路建模的设计与“虚实对应”进行优化，设计方法 的提出基于物理回路建模文件方式，“虚实对应”提出物理回路与逻辑回路的自动解耦技术。物理 回路SPCD 文件中定义二次设备板卡、端口等物理能力描述信息及光缆连接关系，逻辑回路 SCD 文件在各个IED 设备中采用Inputs 容器方式存储所有虚回路的接收连线，通过SPCD 文件中检索 物理回路和SCD 文件中检索逻辑回路，即可获取物理回路与逻辑回路的虚实映射关系，生成含有 逻辑信息流的智能标签，节约了智能标签的制作时间、降低了智能标签制作中虚实对应出错率。 关键词：智能变电站；智能标签；物理回路模型；光缆；虚实对应 Optimization of the Physical Circuit Modeling based on Smart Tags Tian Yuan1 Zhang Zhipeng2 Zhang Chang2 Li Zhan2 Zhang Guohui3 (1. State grid Ningxia Electric Power Company Ministry of Construction, Yinchuan 750001; 2. State grid Tianjin Binhai Power Supply Company, Tianjin 300450; 3. Five-C Smart Power Grid Technology Co., Ltd, Nanjing 211100) Abstract The current smart tag technology in smart substation using proprietary database structure, the technology is not standard, not unified, not conducive to the popularization and promotion of project. The design of this paper is based on the physical circuit modeling and virtual and actualrelation optimization, the design method is put forward based on the physical circuit modeling file, balance is corresponding to put forward the physical loop and logic circuit automatic decoupling technology. Physical loop SPCD file defined in the secondary equipment boards, ports and other physical ability to describe the relationship between information and optical fiber cable connection, the logic circuit of SCD file in each IED device using