土木工程毕业设计终稿.doc

山西晋商百益集团科研楼建筑及结构设计 学生： 专业年级：土木11级 指导老师： 摘 要：本设计为山西晋商百益集团科研楼建筑及结构设计，建筑面积为2572.0㎡，主体二层（局部三层），建筑高度为11.1m，抗震等级为二级，抗震设防烈度为8度，场类别类风压0.4Shanxi Baiyi group scientific research building and structural design Student: Changyong Luo Professional grade: Civil grade 11 Instructor: Liang Pan Abstract: the design of Shanxi Bai Yi group research building architecture and structure design of, the construction area is 2568 m2. The main two-story (partial three), building height for 11.1m. The seismic grade is two, and the seismic fortification intensity is 8 degrees, Class II, the basic wind pressure 0.4kN/m2. There are two parts of architectural design and structure design. The architectural design has been given, the main task is construction graph renderingIncluding plan, elevation, profile and detail, in construction scheme based on structural design, after the load standard value calculation and component section estimation, through structure calculation software for structural modeling, analysis and calculation results, the second adjustment, finally draw beam, plate, column structure construction drawing and finish stair calculation and construction drawing drawing. This design uses reinforced concrete cast-in-place frame structure. Use the stairs plate stairs, through the design, familiar with the basic design of the frame structure design program, initially mastered the use of PKPM structure design software, review the design of reinforced concrete, earthquake engineering and other disciplines, familiar with the use of a variety of specifications of the standard search, for the work play a solid foundation. Keywords: frame structure; structure design; load standard value; slab stair 目录 第一章 设计资料及任务 1 1.1工程概况及设计数据 1 1.2设计任务 1 第二章 建筑设计 2 2.1科研楼功能 2 2.2设计基本原则 2 2.3总体布局 3 2.4房间设计 3 2.5建筑平面设计 3 2.6剖面设计 3 2.7立面设计 4 2.8体型设计 4 2.9建筑图 4 第三章 结构设计 5 3.1结构设计总序 5 3.1.1结构选型与布置 5 3.1.2梁、板、柱尺寸初选 5 3.1.3计算参数 6 3.2可变荷载标准值选用 11 3.3上部永久荷载标准值选用 11 3.3.1楼面恒载 11 3.3.2屋面恒载 11 3.3