锅炉原煤仓变形故障诊断分析及处理.pdfVIP

  • 31
  • 0
  • 约1.49万字
  • 约 5页
  • 2017-06-04 发布于北京
  • 举报

锅炉原煤仓变形故障诊断分析及处理.pdf

锅炉原煤仓变形故障诊断分析及处理.pdf

浙 江 电 力 2016 66 ZHEJIANG ELECTRIC POWER 第35 卷第9 期 锅炉原煤仓变形故障诊断分析及处理 李雪峰 (浙江浙能北仑发电有限公司, 浙江 宁波 315800 ) 摘 要: 针对锅炉原煤仓变形故障, 通过现场检测试验统计分析了原煤仓变形的位置和大小、 结构变 位量、 测厚数据以及应力测试数据, 并使用ANSYS 有限元结构分析软件, 对原煤仓进行建模计算及结 构强度、 刚性、 变形等情况的核算。 给出致使原煤仓变形的主要因素, 制定出有效的解决方案, 消除 了原煤仓变形的安全隐患。 关键词: 原煤仓; 变形诊断; 应力测试; 测厚 中图分类号:TK284.3 文献标志码:B 文章编号: 1007-1881(20 16)09-0066-05 Diagnosis and Treatment of Raw Coal Bunker Deformation Fault of Boiler LI X uef eng (Zhejiang Energy Beilun Power Generation Co. , Ltd. , Ningbo Zhejiang 315800 , China ) Abstract: Aiming at a raw coal bunker deformation fault of boiler , the paper analyzes the location and scale of the fault , structural displacement amount , thickness measurement data and stress measurement data through field inspection and test ; moreover , it uses finite element structure analysis software ANSYS for raw coal bunker modeling calculation and structural strength , rigidity and deformation check. The paper also pre- sents main reasons of the deformation and lays out effective solutions to eliminate potential safety hazards of raw coal bunker deformation. Key words: raw coal bunker ; deformation diagnosis ; stress test ; thickness measurement 壁变形、 结构变位、 仓壁焊缝以及仓壁厚进行检 0 引言 测分析, 为查找二期锅炉原煤仓变形原因提供参 某发电厂二期工程3×660 MW 亚临 燃煤锅 考依据。 炉, 每台锅炉有6 个上部为圆筒、 下部为偏心圆 1.1 原煤仓仓壁变形 锥型原煤仓。 单个原煤仓自重 100 t , 最大可储煤 对二期3 台锅炉的原煤仓变形部位进行检查 700 t 。 3 台锅炉于2000 投入使用, 20 14 8 和统计, 确定变形的主要位置和尺寸大小, 其中 月, 原煤仓4B 出现漏煤粉现象, 经检查发现 3 1 个原煤仓变

文档评论(0)

1亿VIP精品文档

相关文档