颗粒集合体变形破坏特征离散元计算分析.pdfVIP

Joumal of Southeast University (English Edition) Vo l. 26 , No. 4 , pp. 608 - 613 D配. 2010 ISSN 1 ∞3-7985 Analysis of granular assembly deformation using discrete element method Zhao Xueliang (Sch∞l of Civil Engineering , Southeast University , Nanjing 21α96， Chlna) Abstract: The discrete element method is used to simulate deformation from the perspective of microscale. specimens under three different loading conditions ( conventional 1 Numerical Model triaxial compression , plane strain, and direct shear) with different initial conditions to explore the underlying mechanics ηle discrete element model is composed of distinct parti- of the specimen deformation from a microscale perspective. cles which displace independently and interact only through Deformations of specimens with different initial void ratios at contacts or interfaces between the adjacent particles. Walls different confining stresses under different loading conditions are are used to simulate the boundary conditions. Newtons sec- studied. Results show that the discrete element models ond law and the force-displacement law are the two basic successfully capture the specimen deformation and the strain theories and calculations. Different contact constitutive localization. ParticJ e behaviors incJuding parti cJe rotation and