三孔双向卧式组合镗床夹具设计.doc

三孔双向卧式组合镗床夹具设计 摘 要 双向卧式组合镗床双向卧式组合镗床CAD图纸和完整版说明书，凡下载了本文的读者请留下你的联系方式（QQ邮箱），或加我百度用户名QQ，我把图纸发给你。最后，希望此文能够帮到你！ 英文题目 ABSTRACT CK-ⅡNumerically-controlled machine tool headstock horizontal type two-sided combination boring lathes and jig design ABSTRACT The bidirectional horizontal-type combination boring lathe design mainly includes the horizontal-type single location two-sided combination boring lathe kinematic scheme the design and the multi-axle-box design, the jig, the cutting tool guide design and the clamp choice. The horizontal-type single location two-sided combination boring lathe kinematic schemes design and the multi-axle-box design, the jig, the cutting tool guides design and clamps choice is aggregate machine-tools key component, is guarantees the working accuracy the key component. It and engine beds other parts has and the close relation. Therefore, the request aggregate machine-tool must have the good rigidity and the enough clamping force, guaranteed that the work piece does not have the displacement in the entire processing process. At the same time, satisfies the work piece processing each specification, must guarantee the work piece does not permit the distortion, raises the productivity and reduces the production cost. The technology capability and the usability is friends with. by the processing components technological conditions is the thick boring, therefore uses at the same time both sides boring, not only processes conveniently, moreover the production efficiency is high, therefore uses the two-sided horizontal-type combination boring lathe to carry on the processing is reasonable. According to the processing components processing characteristic, choice two take the localization datum at the same time, the limit work piece in processing time six degrees-of-freedom. In order to guarantee that the pointing accuracy and the stability, use the bottom plane localization. The positioning pin uses the manual swiveling mechanism positioning pin, with t