SSD1963的样例程序 c语言驱动读写程序（国外英文资料）.doc

SSD1963的样例程序 c语言驱动读写程序（国外英文资料） This program is the initializer for C8051f360 + ssd1963 which drives a 4.3-inch color screen. It is for 16-bit data input, and the image is shown in 565RGB format. / * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * data type * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * / Typedef unsigned char uchar; / * Unsigned 8 bit quantity * / Typedef signed char schar; / * Signed 8 bit quantity * / Typedef unsigned int uint; / * Unsigned 16 bit quantity * / Typedef signed int sine t; / * Signed 16 bit quantity * / = = = = = = = = / / Data type = = = = = = = = Typedef union { Unsigned char UByte [2]. Unsigned int UInt; } UWORD; Void SSD1963Data_16 (uchar sdataH, uchar sdataL); Void SSD1963Data1_16 (uint dat); Void SSD1963Command_16 (uint CMD); Void SetPixel (uint Col, uint Page, uint color); / / display a phase element Uint GetPixel (uint Col, uint Page); / / get a pixel / * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * The Conf foot of SSD1963 to control how read and write, If 0 is 6800 bus MODE If bit 1, it is 8080 bus. The following definition is 8080 MODE (8080 by default), which can be modified by modifying the Conf jump point. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * / Void SSD1963Command_8 (uchar CMD); Void SSD1963Data_8 (uchar sdata); Void SSD1963Init (); Uchar GetSSD1963Data_8 (); Uint GetSSD1963Data_16 (); Void ReadSSD1963Set (); # define SetSSD1963RD () SetBit (P4, 4) # define SetSSD1963WR () SetBit (P4, 5) # define SetSSD1963CS () SetBit (P4, 2) # define SetSSD1963DC () SetBit (P4, 3) # define SetSSD1963Reset () SetBit (P4, 1) # define SetSSD1963Wait