内存检测步调和内存检测异常弊病剖析（国外英文资料）.doc

内存检测步骤和内存检测异常故障分析（国外英文资料） Memory detection is an important test for machine failure. How memory is detected and there is a certain step, and once the memory fails, how can we analyze the memory failures and resolve them. The following is an analysis of how the memory is detected and the memory detection exception. In addition, teach you how to identify a few big brands such as Kingston. 1, the memory test First, it is good to judge whether the memory stick is in contact with the slot on the main board. Sometimes there is too much dust in the box, which leads to poor contact between the inside and the socket. At this point, you can remove the memory stick, with rubber or brush to clean the dust, and sweep the dust in the memory slot at the same time, the memory chips with again, restart the computer. Second, determine if there is a problem with the slot. On the main board, there are two or three internal passbook slots, which can be replaced by a slot. Again, if you have a memory expansion of your computer upgrade, you will decide whether you have chosen an incompatibilities with the main board. At this point, you can try to change a memory stick or update the BIOS of the motherboard directly. If you add an internal memory stick to the original memory stick, you need to determine if the two memory sticks are consistent and compatible. In general, you can only ensure that the type of the two memory sticks is identical. This is just some of the common problems and memory and can solve the myself, if there are hardware problems in particles (such as memory, PCB), the safest way to go or to the manufacturers technical repair. Of course, the most practical way to do so is to buy a new memory stick. Two, memory detection common failure analysis 10.3.1 memory detection exception failure analysis Memory to detect abnormal failure is mainly embodied in the system caused by the problem of memory cannot be started, or start is not normal, or machine self-checking when detect m