如何检测主板惹起的弊病（国外英文资料）.docVIP

怎样检测主板引起的故障（国外英文资料） As the computer motherboard components together is the mother, almost all of the parts are to pass the motherboard together to form a complete computer system. In general, the mainboard failure into the failure of soft and hard, soft fault refers to the parts failure caused by poor contact or other outside factors, this kind of failure in general as long as we pay attention to maintenance techniques can solve. A hard failure is caused by the quality of the part itself, and such failures are usually solved by the use of specialized instruments. We are here to analyze only general soft faults. There are three main reasons for the failure of the motherboard: Human failure Some friends, PC knowledge know less, do not pay attention to during operation and safety operation specification, this will cause damage to some parts of the computer. If the equipment and the card, the installation equipment and the card of the card are too hard, cause the damage or deformation of the equipment interface, chip and plate card, causing the failure. Environmental failure A failure caused by an external environment is usually caused by an unknown or unpredictable and irresistible situation. If a lightning strike or a municipal power supply is unstable, it may directly damage the motherboard, in which case there is no way to prevent it. Another condition caused by ambient conditions is the failure of temperature, humidity and dust. The symptoms include frequent freezes, rebooting, or sometimes unbooting, which can cause instability in the machines performance. Defects caused by the quality of the components This is the case that a component of the motherboard is damaged by its own quality problems. This kind of failure normally causes a certain part of the main board function to be unable to function normally, the system is unable to start normally, report the phenomenon such as error in the process of self-examination. The main board failures tend to be failures of