工件装夹（国外英文资料）.docVIP

工件装夹（国外英文资料） Familiar with the job location knowledge An overview of the workpiece assembly The folder of the workpiece In the process of machining, in order to ensure the accuracy of machining, the position of the workpiece on the machine tool should be determined before processing, and it is fixed in order to be processed or tested. The process of locating and clamping the workpiece on the machine tool or fixture is called a clamp. The installation of the artifact contains two things: Locate the correct position of the workpiece on the machine tool or fixture. When the fixture is positioned, it is fixed to keep its position in the process, which is called clamping. 2. The machine tool fixture It is convenient for the workpiece to locate, clamping and guiding tool technology equipment on the machine tool, called jig. Using the fixture positioning and clamping piece, it has the characteristics of high accuracy, stability and high productivity. The fixture has been adjusted in the machine tool, and the workpiece is positioned by the positioning device provided by the fixture, which can be set in the correct position in the machine tool. It is also possible to ensure that the machining surface of the workpiece is relative to the cutting tool. In the case of the fixture, the interposition accuracy of the workpiece with the machine tool and tool is guaranteed by the fixture. The process system of machine tools, jig, tools and workpiece is in the correct position in the processing, thus ensuring the processing precision of the process. The jig is composed of the pin, the positioning element, the clamping device, the knife, the guide device, the connecting element etc. The clip is the basis for the fixture of the machine tool. The positioning element ensures that the workpiece is in the right position in the fixture; The clamp device is used to press the workpiece tightly. The workpiece is used to determine the correct position of the tool relative to the positioning elem