计算机收集第二章习题谜底（国外英文资料）.docVIP

计算机网络第二章习题答案（国外英文资料） Chapter ii the physical layer What problems will the physical layer solve? What is the main feature of the physical layer? Answer: the main problem of the physical layer: (1) the physical layer should be as much as possible to block off the physical device and the transmission media, the means of communication, and the data link layer You dont feel the difference, only consider completing the protocols and services of this layer. (2) provide its service users (data link layer) to transmit and receive bittorrent in a physical transmission medium For the ability of the bitstream to be transmitted sequentially, the physical connection should be solved for the establishment and maintenance of physical connections Release problem. (3) the only important characteristics of the physical layer of data circuit between two adjacent systems: (1) because prior to the OSI, many physical disciplines or protocols were developed, and in the field of data communication, These physical disciplines have been adopted by many commoditized devices, and, in addition, the physical layer protocol covers a wide range of areas, so Instead of creating a new physical layer protocol based on OSIs abstract model, the existing physical discipline is used The physical layer identifies the mechanical, electrical, functional, and discipline characteristics that describe and transmit media interfaces. (2) because there are so many ways of physical connection, there are so many types of media, so the physical protocols are quite complex. Whats the difference between the 2-02 layer and the protocol? A: the discipline refers specifically to the physical layer agreement The 2-03 test gives the model of the data communication system and explains the function of its main constituent building. Answer: source point: the source point device produces the data to be transmitted. The source point is also called the source station. Transmitter: usually the data generated by the source point i