CAD图形的转化(国外英文资料).docVIP

CAD图形的转化 . Construction figure how to draw better than CAD into PKPM structure model of the 2009-03-03 10:51:42 | classification: architectural design | tags: | size medium subscription. The simple summary of how I apply the work is as follows For complex architectural diagrams, you can convert the building diagram directly to the PKPM modeling calculation The right approach is: Double-click the PMCAD interface C AUTOCAD floor plan to the architectural model transformation : select the open DWG figure in the main menu, then choose to convert CAD figure, opened on the right menu choice you need to the pillars of the modeling and axis network and after were selected in figure can choose point after display to select the check into a building model data after can return to modeling. May I say not clear enough, probably process is like this, you actually open after C AUTOCAD floor plan to the architectural model transformation can feel our conversion method. In the case of transformation modeling, it is strongly recommended that you only convert the columns and the axles, the walls and beams to return the modeling, and otherwise it will be easy to shift the variance. If you are making a building map with the sky, the layers are separated and you can do this: 1: OPEN a building or structure, OPEN a floor plan or draw a self-drawn axis (a layer on the axis automatically, if you use CAD, you need to create a layer). 2: according to the need to draw the location of the columns and beams, and other artifacts (note that each component layer and the required components in TchDwg layer, if the trouble, as long as the axis and pillar well) 3: enter command appload and load tchdwg. arx 4: in the dialog box that pops up, select the day and other parameters. 5: run PKPM to bring up the standard layer of the model that has been built, further modify and add the standard layer and set the PKPM parameter to the unsatisfied area Note: the model that has been converted from cad has a fl