dfgh(国外英文资料).docVIP

dfgh Silicate cement ingredients and preparation of raw materials (III) 2007-1-4 author: 4, the ingredients process 4.1 ingredients process and ingredients: The process of toppings: according to the calculation of the ingredients, the various materials are measured according to the requirements. 2, ingredients: Grinding head warehouse ingredients: raw material in ingredients small grinding head set preparation, the ingredients of small under-bin measuring equipment after weighing cooperate directly within the feed mill grinding process. A common process flow is shown below: Ingredients: at the bottom material directly in the circle at the bottom of the library and discharged after the measurement to the same transportation equipment in proportion with feeding, directly into the ground or through the batch transportation and then into the ground. Currently, most new dry cement companies use toppings. Set up raw material yard, prehomogenization and auxiliary raw material yard, the yard, and built a row of ingredients library between raw meal grinding, its specifications than the average small for original materials storehouse, bigger than grinding head warehouse, respectively all kinds of raw materials into the library, in the bottom of the library and discharged after measurement by the same transportation equipment into the ground. The measurement in the process of mixing Measurement: the quantity of a continuous feed flow to determine a set of operations for a given value. Measuring, feeding equipment: most of the measuring equipment with measurement and feed (feed), only a few measuring equipment measurement functions, cooperate with feeding (feed) equipment. Common measurement and feeding equipment: The old equipment The disc feeder Electromagnetic vibration feeder The belt feeder Simple electrons are called feeder The new equipment Constant speed weighing scale The speed of adjustment is given to the electronic belt Weightlessness said Nucleon (matching feeder a