太阳能光伏电池组件质量检测标准(国外英文资料).docVIP

太阳能光伏电池组件质量检测标准 This article is contributed by the fireworks PDF documents may have a poor browsing experience at the WAP end. It is recommended that you choose TXT, or download the source file to the native view. Component quality testing standards... EVA EVA inspection standard Crystalline silicon solar cell capsule sealing material is EVA, ethylene and vinyl acetate ester copolymer, chemical formula structure is as follows (CH2 - CH2) - (CH - CH2) | O | O - O - CH2 EVA is a kind of hot melt adhesive, inviscid and viscous resistance under normal temperature, so that the operation, after a certain condition of molten melt adhesive and hot pressing occurs crosslinking curing, and completely transparent, long-term practice proves: it used in solar cell encapsulation and outdoor are quite satisfactory results. After curing the EVA can withstand the atmospheric change and resilient, it will be crystal silicon group mat under the cover, the silicon wafer group of coating, and material and the upper protection glass, the lower protective material TPT composite membrane (PVF), using vacuum laminating technology adhesive is an organic whole. On the other hand, it can enhance the transmittance of glass, increase the permeability of glass, and gain a gain in solar cell components. EVA thickness between 0.4 mm to 0.6 mm, smooth, uniform thickness, containing crosslinking agent, can be cured at 150 ℃ temperature crosslinking, extrusion process to form stable rubber cover. EVA there are two main types: (1) rapid curing (2) the conventional curing, different EVA laminating process is different Used with ultraviolet resistant agents, antioxidants and curing agent of the thickness of 0.4 mm EVA membrane layer as sealant of solar cells, making it and the sealing between glass, TPT adhesive. The EVA, which is used to encapsulate the silicon solar cell components, is selected based on light performance and weather resistance. Principle 1. EVA has excellent flexibility, impact resista