玻璃化温度(Tg)(国外英文资料).doc

玻璃化温度(Tg)PCB circuit board raw material material and parameter introductionPCB boards are introduced: according to the quality level of the brand from bottom to high: 94hb-94vo -22f - CEM - 1-cem -3-fr-4Detailed parameters and USES are as follows:94HB: regular cardboard, not fire resistant (the lowest grade material, die punch, not power board)94V0: flame retardant cardboard22F: single-sided glass fiberboard (die hole)CEM -1: a single fiberglass board (must be drilled into the computer, not the die)CEM - 3: half a double-sided glass fiber board (except the double-sided board belongs to the bottom material double panel, simple double panel can use this kind of material, cheaper than FR - 4 will be 5 ~ 10 yuan/square meters)Fr-4: double-sided glass fiber boardThe classification of flame retardant properties can be divided into 94vo-v-1-v-2-94hbSemi-solidified film: 1080 = 0.0712 mm, 2116 = 0.1143 mm, 7628 = 0.1778 mmThe FR4 CEM - 3 is a plate, FR4 is a glass fiberboard and the cem3 is a composite substrateA halogen is a substrate that does not contain halogens (elements such as fluorine iodine), because the bromine produces toxic gases and environmental requirements when burned.Tg is the temperature of the glass, the melting point.The circuit board must be flammable, not burning at a certain temperature, only softening. At this point, the temperature point is called the glassy conversion temperature (Tg point), which relates to the durability of the PCBs dimensions.What are the advantages of high Tg PCB circuit boards and high Tg PCBHigh Tg printed circuit board when the temperature rises to a threshold substrate will by glassy state into rubber, the temperature at this point is called the plate glass transition temperature (Tg). That is to say, the Tg is to maintain the rigidity of base material the highest temperature (℃). That is common PCB substrate material at high temperature, produce the phenomenon such as softening, deformation, melting, also reflected in the