瑞美测厚仪技术附件_.pdf

瑞 美 测 量 X-RAY THICKNESS GAUGES RMC 216 RMC216 -- X 射线测厚仪 TECHNICAL APPENDIX 技术附件 1 目 录 1 ． 设备描述 3 2 ． 供货范围 10 3 ． 供货说明 12 4 ． 技术参数 15 5 ． 质量控制标准 17 6 ． 买方提供的服务 18 7 ． 设计联络、调试、培训和测试 19 2 Appendix 1. System Description 设备描述 1. Introduction The RMC 216 series gauging systems provide accurate, high-speed non-contact measurement of metal strip thickness. The RM 216 system has been installed on rolling mills and process lines world-wide, and has been up-dated to include new features and functions as they have been developed to maintain its position as the industry leader in gauging technology. RMC 216 系列测厚仪为金属带材提供精确、高速、无接触式测量。该系统在世界 范围内得到广泛的应用，技术和性能的不断更新，确保了它在工业测厚技术方面的领先地位。 Thickness measurement by the transmission method utilises an X-ray source and a detector mounted on either side of the strip to be measured. These sensors, working under the control and supervision of embedded microprocessors to provide rapid response, low noise, and contact-less measurement of strip thickness on hot and cold rolling mills/process lines. The detector signal is sampled and strip thickness recalculated high speed, including all processing to take into account the material composition and temperature. Thickness outputs are individually configurable for averaging and scaling. 射线源和探头处于测量带材的上下两 端，通过 X 射线穿透方式进行测量。传感器处于高速