钻头选型中的因素分析(Fahd).pptVIP

Bit Design Considerations – Rake Angles Cont.钻头设计因素——倾角（续） Side rake is a measure of cutter skew relative to a line normal to the direction of travel. 侧倾角指刀具与钻头行进方向标准直线之间的倾斜度。 Negative side rake positions the cutter face towards the bits central axes and results in cuttings being urged inward, instead of towards the junk slots. 若侧倾角为负角，则刀具的位置为表面朝向钻头中心轴，这样就会将钻屑推入钻头内部而非垃圾槽中。 Positive side rake positions the cutter face towards the outside diameter and produces the opposite effect. 若侧倾角为正角，则刀具的位置为表面朝向外直径，并能产生与上述相反的效果。 Different companies have experimented extremely high side rake angles, both p