汽车单级驱动桥总成设计研究.doc

广西工学院 2011届毕业设计说明书 课题名称 汽车单级驱动桥总成设计 系 别 汽车工程系 专 业 汽车服务工程 班 级 汽服071 学 号 2007 姓 名 指导教师 2011 年 5 月  广 西 工 学 院 2010届毕业设计（论文）任务书 汽车单级驱动桥总成设计 系 别 汽车工程系 专 业 汽车服务工程 班 级 汽1 学 号 200701 姓 名 指导教师 教研室主任 系 主 任 2011 年 3 月  摘 要 本次设计为参照乘用轿车驱动桥来进行的，目的是为了检验大学几年的学习成果以及为将来的工作打下坚实的基础。说明书中阐述了驱动桥壳的功能与作用、设计的要求及其工作原理，通过查阅大量的汽车设计资料，以及结合所学的知识，对该驱动桥壳进行了方案论证、结构方案分析以及设计计算。本次设计的驱动桥采用半浮式半轴的整体式桥壳单级螺旋锥齿轮传动。普通对称式圆锥行星齿轮（个）关键词： 驱动桥设计 后桥 主减速器 Abstract The second-row seat designed for passenger car drive axle housing to carry out, . The purpose was to test the University of years of learning outcomesAs well as future work to lay a solid foundation for work. Set forth in the specification prepared by the drive axle housing function、The design requirements and its working principle, Through access to a large number of automotive design information, As well as the combination of learned knowledge, Of the drive axle housing program carried out feasibility studies, Structural analysis and design and calculation programs. The design of the drive axle with semi-floating axle as a whole Bridge Shell Single-stage spiral bevel gear. General symmetric cone planetary gear (2) in differential form. Design, including the drive axle housing, The parameters of the main reduction gear and differential determination of Including the main parameters of the choice of calculation, Force situation, Intensity calibration, etc. And also to the two pairs of gears on the supporting bearings of the life of checking. In the final, to sum up this design. Lasted for more than two months the whole graduation project, the teachers of your instructors and fellow students enthusiastic assistance has