复合材料层压板钻孔分层激光超声检测方法_周正干.pdfVIP

49 22 Vol.49 No.22 2013 11 JOURNAL OF MECHANICAL ENGINEERING Nov. 2 0 1 3 DOI 10.3901/JME.2013.22.029 * ( 100191) C TB553 Laser Ultrasonic Detection of Drilling-induced Delamination in Composite Laminates ZHOU Zhenggan SUN Guangkai LI Zheng CHEN Xiucheng (Institute for Nondestructive Testing and Mechatronics Engineering, Beihang University, Beijing 100191) Abstract The positioning and quantitative testing of drilling-induced delamination in aircraft composite structures is not only one of the main difficulties in the field of non-destructive testing(NDT), but also a security problem need to be solved in aviation industry. Laser ultrasonic testing technique is a possible way to solve the problem. An experiment study concerning the verification of the feasibility of detecting drilling-induced delamination with laser ultrasonic technique is carried out. A composite laminate with drilling holes is made as specimen, the broadband characteristics of ultrasonic waves in composites generated by pulse laser are studied, and the wave signals with good signal-to-noise ratio(SNR), high sensitivity and resolution are extracted. The effects of the interface of drilling-induced delamination on the propagation characteristics of laser ultrasonic waves are studied, and the characterization methods of drilling-induced delamination with laser ultrasonics are acquired. Based on the pulse echo and transmission method, the laser ultrasonic C