冷连轧机高速轧制过程中划痕问题地研究.PDF

第28卷　第 3 期 Vol 28 , No3 　24 　 上 　海 　金 　属 2 0 0 6 年 5 月 May , 2 0 0 6 　　　 SHANGHAI METALS 冷连轧机高速轧制过程中划痕问题的研究 徐 　俊 　邱格君 白振华 　李兴东 (宝钢冷轧薄板厂 , 上海　200431) 　　　　(燕山大学机械工程学院) 　　【摘要】　针对宝钢 1220 冷连轧机高速生产过程中的划痕问题 , 通过大量的现场试验 与理论研究 , 在对划痕产生的机理进行深入分析的基础上 , 首次引入划痕判断综合指标的概 念 , 把划痕治理与轧制规程在线优化设定有机结合起来 , 将冷连轧机的各个机架作为一个整 体来统筹考虑 , 建立了一套以划痕防治为目标的轧制规程优化数学模型 , 并直接应用到宝钢 1220 五机架冷连轧机的生产实践 , 取得了良好的使用效果 , 创造了较大的经济效益。 【关键词】　冷连轧 　薄板划痕 　划痕判断 　综合指标 　轧制规程 THE COUNTERMEASURES OF SCRATCH MARK ON STRIP DURING HIGH SPEED ROLLING PROCES OF TANDEM COLD MILL Xu Jun 　Qiu Gejun Bai Zhenhua 　Li Xingdong ( Thin Strip Co , Ltd. of Baosteel) 　　　(Mechanical College of Yanshan University) 　　【Abstract 】 　Regarding the scratch mark problem during high speed rolling process of 1220 tandem cold mill in Baosteel , a new conception of aggregative indicator about the scratch mark judgments was first introduced based on the analysis of scratch mark production mechanism , and through vast field experiments and theoretical research. The countermeasures of decreasing scratch mark and the online optimizing of rolling regulations were organically combined together , each stand of tandem cold mill was given an overall consideration as a whole body , a set of mathematical models about rolling regulation optimization was completed that aimed at preventing the scratch mark. The direct application of the model to the production of Baosteel