- 7
- 0
- 约2.18万字
- 约 60页
- 2017-06-07 发布于湖北
- 举报
* Concentric needle, if an air sample was withdrawn without replacing the volume, it would create a vacuum within the vial. 同心针头, 如空气样品被取出后未替代容积,将在样瓶中产生真空. * NOTE: Sample heat up time is not built into the method. 注: 样品升温时间未建立于方法中. * NOTE: Assembly does not spin completely, it will need to be rotated to the left or right depending on its location. 注: 组件并不完全自旋, 根据它的位置需要左旋或右旋. * Preparing the Blank/Samples-Syringe Techniques准备空样/样品-针管技术 Draw the plunger back until there is a 1 μL plug of liquid between the 1 μL and 2 μL mark 抽回柱塞直到
原创力文档

文档评论(0)