基于 mcu 的以太网接入模块设计大学学位论文.docVIP

  • 2
  • 0
  • 约9.67千字
  • 约 16页
  • 2017-06-16 发布于辽宁
  • 举报

基于 mcu 的以太网接入模块设计大学学位论文.doc

基于 mcu 的以太网接入模块设计大学学位论文

学 士 学 位 论 文 基于MCU的以太网接入模块设计2013年月日 摘 要 给出了单片机控制RTL8019AS实现以太网通讯的软硬件设计方案。首先设计了系统的硬件电路,并对接口电路的设计进行了详细的阐述,然后设计了RTL8019AS的以太网驱动程序.最后通过一个简单的数据收发试验验证了设计的正确性。 关键词 RTL8019AS; 51单片机; TCP/IP协议;传感器 Abstract Given SCM RTL8019AS Ethernet communications hardware and software design. Design the hardware circuit, the interface circuit design in detail, and then design RTL8019AS Ethernet driver. Send and receive data through a simple test to verify the correctness of the design. Key words The RTL8019AS; 51 microcontroller; TCP / IP protocol; sensor 目 录 第1章 绪论 7 1.1本设计的背景 7 1.2以

文档评论(0)

1亿VIP精品文档

相关文档