土木工程毕业设计结构设计部分精选.docx

广西科技大学鹿山学院毕业设计（论文）题 目：某局柳州白莲洞基地综合业务楼结构、施工设计（第4轴框架、第三层楼板）结构设计部分系 别： 土木工程系 专业班级：姓 名：学 号：指导教师：职 称： 讲 师 二〇一六 年 五 月 二十 日摘 要本次毕业设计题目为某局柳州白莲洞基地综合业务楼楼设计。设计内容包括结构设计、施工设计。本设计主体为六层；底层高为4.5米，二至四层高为3.4米，其余层高为3.6米，总建筑面积近为3669.52平方米，室内外高差为0.60米，本工程设定相对标高±0.000，功能上满足人们智能办公的使用要求，能够充分的利用有限的空间使布局更加合理。?本工程采用钢筋混凝土框架结构，建筑抗震设防烈度为6度，基础采用柱下独立基础，楼梯采用板式楼梯。结构计算包括手算和电算两部分，其中手算部分包括：一榀框架的结构计算，该框架第三层楼板计算，框架柱下基础的计算。电算部分采用PKPM结构设计软件进行分析计算。?通过毕业设计，综合应用四年的所学的专业知识，使我的专业水平得到很大提高，为将来的工作打下了坚实的基础。?关键词：结构设计；荷载统计；内力组合；构件设计。?AbstractThe graduation design topic for a bureau of Liuzhou Bailian Dong base building integrated business building design. The design content includes structure design, design and construction. The main body of this design for six; bottom 4.5 meters high, two to four storey is 3.4 meters, the rest of the storey is 3.6 meters, with a total construction area of nearly 3669.52 square meters, height difference between indoor and outdoor is 0.60 m, set the relative elevation 0.000 and functions meet the requirements of intelligent office people, can fully use the limited space layout more reasonable.Reinforced concrete frame structure is adopted in this project, the seismic fortification intensity is 6 degrees, based on the use of single foundation under column, use the stairs plate stairs. Structural calculation including hand counting and computing in two parts, the manual calculation part includes: a pin frame structure calculation, calculation of the framework of the third floor, calculation of foundation under the column frame. Computer section were calculated and analyzed using PKPM structure design software.Through the graduation design, the comprehensive application of the four years of the professional knowledge, so that my professional level has been greatly improved, for the future work to lay a solid foundation.Key Words: structural design; load statistics; internal force combination; component design. 目 录摘 要IAbstractII目 录III1工程概况12结构布置12.1 梁、板、柱的截面确