lightning耳机应用方案.pdf

Sparkmcu Lightning耳机应用方案 Lightning 耳机应用方案 Apple Lightning Audio Module Sparkmcu 1 页 共 3 页 Sparkmcu Lightning耳机应用方案 1 Product summary 1.1 Summary Shenzhen spark electronics co.,ltd. launch dedicated to Lightning headphone program. Through the communication protocol built-in digital simulator and amplifier chip can be realized: volume plus, volume reduction, the last song, the next song, play, pause, answer / hang up the phone. 1.2 Applications Program is applied to: Lightning headphones, iPhone 7 cable 1.3 Main characteristics (1) can support 24 high-definition audio, to achieve a more superior sound quality. (2) support volume -, on a song, the next song, play, pause, then hang up the phone (3) the line is simple, the component is small, the technology is mature, the price performance ratio is high. 1.4 Typical applications Apple Lightning Audio Module Accessories may make use of the Apple Lightning Audio Module (LAM) to create the following types of accessories that plug into the Lightning connector on Apple devices running iOS 7 .1 or later: ● headsets (see Headsets (page 497)) ● accessories with an integrated 3.5 mm headset j ack, but not integrated speakers ● non-audio accessories Accessories using the LAM module may: ● Draw power from the Apple device, even when asleep, and eliminate the need for an internal battery. ● Receive lossless stereo 48 kHz digital audio output from the Apple device. ● Send mono 48 kHz digital audio input to the Apple device (see I2S (page 103)). ● Provide power to the Apple device from an internal battery and/or a pass-through external power source. ● Implement Apple Headset Remote Volume Up/Volume Down/Center buttons. ● Implement additional but