QSQR.04.147 A11型车用减震垫标准(国外英文资料).docVIP

QSQR.04.147 A11型车用减震垫标准(国外英文资料) Q/CAC, 04, 147 - 2000 Anhui Chery Automobile Co., Ltd. enterprise standard Q/CAC 04 147-2000 Model A11 cushion for car shock absorption replace 1 range This standard specifies the technical requirements, test methods, inspection rules, signs, packaging, transportation and storage of A11 type recycled fiber blended vibration damping insulation pad. This standard applies to the A11 cushion for the use of recycled fiber blends. It is mainly used for shock absorption, sound insulation and heat insulation inside the car body. 2 citation criteria The provisions of the following standards constitute the provisions of this standard by referencing them in this standard. The editions shown are valid when published in this standard. All standards will be modified, and the parties to this standard shall explore the possibility of using the latest versions of the following standards. Q/CAC 04. 057-1999 CAC trademark mark Q/CAC. 04. 058-1999 marking requirements for automotive components Q/CAC. 04. 122-1999 product packaging requirements 3 terms No. 4 technical requirements 4.1 product size and allowable deviation requirements The size of the product shall comply with the requirements of the product drawing for the production. The overall dimension tolerance values are shown in table 1. Thickness and its allowable deviation are shown in table 2. Table 1 allowable deviation value of overall dimension mm Dimension 0~199 200~400 401~500 501~1000 Allowable deviation + 3 + 4 + 5 + 6 Table 2 allowable deviation of thickness mm Thickness Four Six Eight Ten Fourteen Twenty Twenty-five Twenty-eight Thirty Allowable deviation + 0.5 + 1 + 1 + 1 + 2 +3 -2 +3 -2 + 2 + 2 4.2 appearance requirements The appearance quality of cushion felt needs to be smooth and uniform, and no delamination, break, stain, light transmission and so on. 4.3 product material and structure 4.3.1 material 4.3.1.1 upper plastic asphalt insulation material contains a large number of inorg