程控交换与软交换第4章习题(含部分答案)(国外英文资料).docVIP

程控交换与软交换第4章习题(含部分答案)(国外英文资料) The fourth chapter of SPC exchange and Softswitch Fill in the blanks 1, China No. 1 signaling belongs to signaling, and No.7 signaling belongs to signaling. The signaling transmitted between the 2. user terminal device and the switch is signaling. 3. the signaling transmitted between the switch and the switch is signaling. There are 3 types of transmission 4. signaling in multiterminal link, respectively, and _____________ mixed mode. 5, according to the different signaling transmission channel can be divided into signaling and ____________ signaling. 6, according to the different signaling work area, can be divided into subscriber line signaling and ____________ signaling. The basic message unit of the 7. NO.7 signaling system is a signaling unit including a message signaling unit, a link state signaling unit, and a signaling unit. The 8. No.7 signaling system consists of the messaging section, MTP, and components. The message passing part of the 9.No.7 signaling system includes signaling data link function and signaling network function. 10, the No.7 signaling network by SP, and ____________ signaling point ______________ composition. Control 11, No.1 signaling is used _______________, No.7 signaling control mode is used in _______________. Bound 12, No.7 signal unit is through the 8 bit identification code (Flag) to achieve, the code is in order to ensure the code not in the other part of the signal unit, sending the message to the 0 insert operation, so the receiver to delete 0. 13, the message signaling unit is used to pass signaling messages from the user level; The link state signaling unit is used to indicate the state of the link when the link is initially enabled or a link failure occurs; The role of the filling signaling unit is to fill the position when the link is empty or when the link is congested. 14, SCCP provides four types of services, namely, 0 basic connectionless services, 1 types of ordered connectionless