起重思索信号工复习题试题2(国外英文资料).docVIP

起重思索信号工复习题试题2(国外英文资料) Construction special work type examination questions 2 First, fill in the blanks (0.5 points per room, 15 points) 1. Tower cranes can be divided into fixed tower cranes, (mobile) tower cranes and (self lifting) tower cranes. 2, tower crane main parameters include (amplitude), (lifting weight), (lifting torque), (lifting height). 3 tower cranes are generally equipped with (lifting) institutions, (luffing) institutions, (slewing) institutions and (walking) institutions. These four institutions are the most basic working mechanisms of tower cranes. 4. The basic structure of tower crane consists of (metal structure), (work mechanism) and (electrical equipment) part. 5. The rated lifting capacity is the sum of the weight permitted by the tower crane and the quality of the spreader. 6. The lifting capacity of a tower crane is related to the change of the amplitude. 7, the basic deformation of the bar (tension) (compression) (shear) (bending) () five. 8. The whole stability of tower crane means that tower crane can resist the influence of overturning factors such as (heavy load), wind load (dynamic load) and slope (etc.), and can keep the ability of not tilting. 9, tower crane routine maintenance should implement the cross operation method is (adjustment) (fastening) (lubrication), cleaning, corrosion protection. 10. The performance test of rated lifting load of tower crane is carried out according to the following two conditions. (lifting the corresponding rated lifting weight at the maximum range) (lifting the maximum lifting weight at the rate of maximum lifting) Two, multiple-choice questions: (1 points per subject, 40 points) 1, light and medium-sized tower crane adopts (A) wheeled walking mechanism. A, 4 B, 8 C, 12 D, 16 2, the following parts do not belong to the tower crane metal structure, the basic components are (D). A, B, C, rotary crane tower D, luffing mechanism 3 、 the balance arm of heavy lifting tower crane often adopts (C) structure