全部式LED灯认证(国外英文资料).docVIP

整体式LED灯认证(国外英文资料) Integrated LED lighting certification On March 22, 2010, energy star has released the integral LED lamp energy star certification revision v1.1, the original version of the monolithic leds minimum working frequency from greater than or equal to 150 hz to greater than or equal to 120 hz. Other for integral LED lamp light efficiency, luminous flux, light intensity, color temperature and realism, packaging, noise and other requirements and released on December 3, 2009 the final draft of the same, to take effect time also did not change, is expected to take effect on August 31, 2010. Range of 1. These standards apply to the integral LED lamp, it is defined as a kind of contain light-emitting diodes (leds), an integrated LED driver, and a design used by the ANSI standard lamp holder/socket is connected to the circuits standard lamp lights. These include non-standard integrated LED lights, as well as integrated LED lights designed to replace standard universal incandescent, decorative (candlestick style) lamps and reflective lights. The requirement for all lights The requirements of the lamp Correlated color temperature (CCT) and deep ultraviolet lamp (Duv) must contain the following specified correlated color temperature (according to ANSI C78.377-2008), a, and the range of fall within the seven order chromaticity quadrilateral defined in attachment. Nominal relative color temperature target color temperature (K) and tolerances target Duv and tolerance 2700K2725 plus or minus 1450,000 plus or minus 0.006 3000k30445 plus or minus 1750.000 plus or minus 0.006 3500K3465 plus or minus 2450.000 plus or minus 0.006 4000K3985 plus or minus 2750.001 plus or minus 0.006 Color to maintain The minimum lumen Maintenance test cycle (6, 000 hours) is within 0.007 of the CIE 1976 (u v) Color scheme. Color rendering index Color Rendering Index (CRI) is the lowest Color Index (CRI) of 80 The dimmer The Dimming lamp can be dimmed or undimmed. The product packaging must