基于激光通信技术语音传送装置本科学位论文.docVIP

编号 本科生毕业Laser-based transmission of voice communication technology devices 2008 年 月 摘 要 , 并用脉冲数字编码来调制这一载波的通信方法激光具有扩散小、相干性和方向性好、光束功率密度大等优点, 因而适合于保密通信和航天通信与无线电微波通信相比, 激光通信由于其通信容量大, 发射天线体积小，抗射频, 抗电磁脉冲干扰以及反窃听性能好, 特别是抗核破坏能力强等优点而倍受军事和航天领域的青睐。 本文介绍了大气激光通信的原理，以及激光通信系统的组成等。简要的介绍了单片机ATMEGA32的结构特点和其引脚配置，简单说明它对音频设置的实现。从而设计一款基于激光通信系统的语音传送装置。该论文介绍了系统的总体设计，并着重说明该设计的硬件、软件的设计，然后简单描述了调试，分析的结果以及设计中的不足之处。 关键词：激光通信 ATMEGA32 UART ABSTRACT Laser communication is based on laser light for the carrier, and digital pulse code modulation of the carrier to the communication method of the laser with the proliferation of small, coherent and directional, and the beam power density, etc., thus suitable for secure communications and space communications and radio compared to microwave communications, laser communications as a result of its communications capacity to launch anti-small RF antenna, anti-electromagnetic pulse interference, as well as good anti-wiretapping, anti-nuclear damage in particular the advantages of strong and popular military and space of all ages. This paper introduces the principle of atmospheric laser communications, as well as laser communication system。Brief introduction of the structural characteristics of single-chip ATMEGA32 and its pin configuration, a brief description of the achievement of its audio settings so as to design a laser-based communications system of voice transmission device. This paper introduces the system design, and highlights the design of hardware, software design, and then a brief description of the debugging, analysis, and design deficiencies. Keywords: Laser communication ATMEGA32 UART 目 录 第一章 绪论 - 1 - 1.1 激光通信简介 - 1 - 1.2 国内外发展现况 - 2 - 第二章 课题设计原理 - 3 - 2.1 大气激光通信系统 - 3 - 2.1.1 激光器 - 3 - 2.1.2 光的调制 - 4 - 2.1.4 光接收系统 - 5 - 2.2 ATMEGA32简介 - 6 - 2.2.1 引脚说明 - 6 - 2.2.2特点及功能 - 7 - 第三章 硬件电路电路设计 - 8 - 3.1 总体方案设计 - 8 - 3.2 硬件电路设计 - 9 - 第四章 软件设计 - 13 - 4.1 半双工软件UART - 13 - 4.2 发送子程序 - 14 - 4.3 接收子程序 - 17 - 4.4 程