IEC61850-9-2标准下合并单元信息模型及其映射的实现.PDFVIP

智能电网 Smart Grid 26卷 12期 电网与清洁能源 Vol.26 No.12 2010年12月 Power System and Clean Energy Dec. 2010 ： ： ： 章编号 1674-3814（2010）12-0030-04 中图分类号 TM76 文献标志码 A IEC 61850-9-2 准下合并单元信息模型 及其映射的实现 谷晓妍，罗 彦，段雄英 大连理工大学 电气工程学院，辽宁 大连116023） Information Model and Mapping Implementation of Merging Unit Based on IEC 61850-9-2 GU Xiao-yan, LUO Yan, DUAN Xiong-ying Department of Electrical and Electronics Engineering, Dalian University of Technology, Dalian 116023, Liaoning Province, China ） ： ABST R ACT Specific communication service mapping between 方式：合并单元将数字量采样信号以光纤方式接入 the bay level and the process level is defined in IEC 6 1850 -9 -2, 过程层总线，间隔层保护、测控、计量 设备不再与 which is the standard of the network transmission for the sample 合并单元直接相连，而是通过过程层总线获取采样 value. According to this standard, information models of the merging 值信号，从而达到采样信号的信息共享[1]。与IEC61850- unit and the sample value are designed. Using the service 相比， 不仅对采样频率提出更高 9-1 IEC 61850-9-2 SendMSVMessage, the Ethernet link layer service mapping of the 的要求，而且由于采用了过程层网络总线传输介 sample value model is implemented and the transmission of the 质，在传输时还需要考虑网络传输流量的控制[2] 。 sampled value from the merging unit is realized. Experiments show that the sampled value from the mergin