Rev3 950钢结构施工方案(张金东).doc

档案号 File No： 上海赛科石油化工有限公司90万吨/年乙烯装置 900 kt/a Ethylene Plant of Shanghai SECCO Petrochemical Co. Ltd 950/960管廊钢结构施工技术方案 Execution Statement for Steel Structure of 950/960 Pipe Rack 编 制： 张金冬 Zhang Jindong Originated By: 施工技术审核： 洪庆根 Hong Qinggen Tech. Reviewed By: 质量保证审核.： 戴东明 Dai Dongming QA Reviewed By: 安全技术审核： 边长刚 Bian Changgang HSE Reviewed By: 审 定： 徐庆海 Xu Qinghai Checked By: 批 准： 杜振东 Du Zhendong Approved By: 编制时间 Date： 2003-5-20 中国石化集团第十建设公司上海化学工业区项目部 Shanghai Chemical Industry Park Project Department of The Tenth Construction Company of SINOPEC  目 次 Index 1.工程概况 General introduction 1 2.施工程序 Construction procedure 1 3.施工准备 The construction preparation 2 4.工厂化预制 Factorial prefabrication 2 5.材料验收 Raw Materials Acceptance 8 6.基础的验收与处理 Foundation Acceptance and Treatment 11 7.钢结构安装Structure erection 14 8.连接固定 Connecting and fixing 16 9.防腐 Corrosion Prevention 18 10.安装质量检查与验收 Inspection and Acceptance of Installation Quality 18 11.交工验收 Handing over 20 12.HSE管理 HSE Management 24 13.劳动力组织 Labor Force Organization 25 14.施工机具 Construction Equipment and Tool 26 15.施工进度计划 Construction Schedule 26 1. 工程概况 General introduction 1.1 概述 General 上海乙烯裂解装置950/960管廊共有钢结构约1450吨，钢结构主要由H型钢柱和钢梁构成，节点的连接采用20MnTiB，10.9级摩擦型高强度螺栓连接，选用扭剪型高强螺栓。 There is total 1450 tons steel structure for 950/960 pipe racks in Shanghai ethylene cracking plant. All the main steel structures are made of H-shape columns and beams. 20MnTiB 10.9 grade twist-shear type of high strength bolts is used for the connecting of joint. The responsible company for design is SINOPEC ENGNEERING INCORATION (SEI) and the responsible company for supervision is QILU ENGNEERING COMPANY. We tenth construction company are responsible for the factory-prefabrication and the site erection of the steel structure 。 1.2 编制依据 Refe