【2017年整理】OTDR培训.pptVIP

3 7 1 8 2 5 3 4 6 3 7 1 8 2 5 3 4 6 3 7 1 8 2 5 3 4 6 3 7 1 8 2 5 3 4 6 3 7 1 8 2 5 3 4 6 5 6 1. The “A” cursor is set at the end of the initial launch dead zone -- after the first reflection levels out to a relatively straight line. The level where the backscatter starts indicates how good the connection to the OTDR is, how much loss there is in the first few hundred feet of fiber, and the amount of power injected into the fiber. 2. A “Reflective Event” is normally a mechanical splice or in-line connector. It is characterized by a sharp spike up from the line of backscatter. There may also be