4位数码管的1302时钟(金向维)(国外英语资料).docVIP

4位数码管的1302时钟(金向维)(国外英语资料) # include stc12c5a60s2.h / / 内部振荡器器12m # intrins.h in sbit qw = p1 ^ 6; / / 千位 sbit bw = p2 + 1; / / 百位 sbit sw = p1 ^ 7; / / 十位 sbit gw = p2 ^ 7; / / 个位 sbit dot = p0 ^ 6; / / 小数点dot sbit a7 = p0 ^ 6; / / 数码管dot sbit a6 = p1 ^ 5; / / 数码管g段 sbit a5 = p2 ^ 4; / / 数码管f段 sbit a4 = p0 ^ 4; / / 数码管e段 sbit a3 = p0 ^ 5; / / 数码管d段 sbit a2 = p0 ^ 7; / / 数码管c段 sbit a1 = p2 ^ 3; / / 数码管b段 sbit a0 = p2 + 5; / / 数码管a段 sbit doubledotp = p2 ^ 2; / / 秒两个点正极 sbit doubledotn = p2 ^ 6; / / 秒两个点负极 sbit pok = p0 ^ 1; / / ds1302的时钟引脚 sbit sda = p0 ^ 2; / / ds1302的数据引脚 sbit rst = p0 ^ 3; / / ds1302的片选引脚 sbit key1 = p1 + 1; / / 设置键 sbit key2 = p1 ^ 0; / / 增大键 sbit key3 = p3 ^ 7; / / 减小键 sbit key4 = p2 ^ 0; / / 闹钟键 sbit speaker = p3 ^ 3; / / 蜂鸣器 unsigned char code duanma [16] = {0x3f, 0x06,0x5b, 0x4f, 0x66,0x6d, 0x7d, 0x07,0x7f, 0x6f, 0x77,0x7c, 0x39,0x5e, 0x79,0x71}; / / 0 - 9 and - f bit aa = 1, bb = 1, cc = 1, dd = 1; / / 记录4个按键上次的状态 a shanshuo = 1; / / 用于设置项闪烁 a _ alarm display; / / 闹钟时间显示 bit alarm _ switch; / / 闹钟开关 a jishu4kaiguan; / / 用于由显示闹钟时间自动返回显示时钟时间功能 a jishu5kaiguan; / / 用于误差修正 a xiuzhengkaiguan = 1; / / 用于误差修正 unsigned char fengmingleixing; / / 蜂鸣类型 unsigned char m; / / 用于蜂鸣类型3 unsigned char shezhi; / / 指示时钟设置到哪一项 unsigned char alarm _ shezhi; / / 指示闹钟设置到哪一项 unsigned char hour, min, sec; / / 时钟的小时, 分钟, 秒 unsigned char and _ hour, and _ min; / / 闹钟的小时, 分钟 unsigned char jishu, jishu2, jishu3; / / 显示计数 unsigned char qianwei, baiwei, shiwei, gewei; / / 定义千位, 百位, 十位, 个位 unsigned int jishu4; / / 用于由显示闹钟时间自动返回显示时钟时间功能 unsigned int jishu5; / / 用于误差修正 unsigned int xiuzhengzhi = 560; / / (0 - 900ms) / * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * 函数声明 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * / void delay _ ms (unsigned int (a); timer0init (void); void void duantihuan (unsigned char and); void write (byte _ ds1302 _ unsigned char strokes); unsigned char ds1302 _ byte _ read (void); void write (char