IPCONFIG敕令详解(国外英语资料).doc

IPCONFIG命令详解(国外英语资料) IPCONFIG command detailed 1. specific functions This command is used to display all current TCP/IP network configuration values, refresh the Dynamic Host Configuration Protocol (DHCP), and domain names System (DNS) settings. Using a IPCONFIG without arguments, you can display the IP address, subnet mask, and default gateway for all adapters. 2. grammar Ipconfig, [/all], [/renew, [adapter], [/release, [adapter], [/flushdns], [/displaydns], [/registerdns], [/showclassid,, adapter], [/setclassid, adapter, [classID] 3. parameter description /all displays the full TCP/IP configuration information for all adapters. In the absence of this parameter, IPCONFIG displays only the IP address, subnet mask, and the default gateway value for each adapter. An adapter can represent a physical interface (for example, a network adapter installed) or a logical interface (such as a dial-up connection). /renew [adapter] updates all adapters (if the adapter is not specified), or the DHCP configuration of a particular adapter, if it contains the adapter parameter. This parameter is available only on computers that have a network card configured to automatically obtain IP addresses. To specify the adapter name, type the adapter name that is displayed with the IPCONFIG command without arguments. /release [adapter] sends a DHCPRELEASE message to the DHCP server to release all adapters (if the adapter is not specified) or specific adapter (if adapter contains the current DHCP configuration parameters) and discard the IP address configuration. This parameter disables the TCP/IP configured to automatically obtain an adapter for the IP address. To specify the adapter name, type the adapter name that is displayed with the IPCONFIG command without arguments. /flushdns clean up the contents of the DNS client resolver cache. If necessary, during the DNS troubleshooter, you can use this process to discard negative cache records and any other dynamically added records from the cac